help... new master server

[mxia205]

when i turn on my server it is showing this

Connection to Steam servers successful.
VAC secure mode is activated.
No masters loaded
Using default master

on the server list (master server) i cant find my server...its home made server so it shuld show up like first of all....but i dont have new master server or new patch....

this is only problem senc 2006....

thanx a lot GMs

EDIT: oh yea i forgot... and i am not runing firewalls or antywiruses

[Mr.Bob]

https://support.steampowered.com/kb_...6253-IOAB-2296


Unable to find dedicated server in Server Browser
Question

I can't find my server listed in the Server Browser, what's wrong?
Answer

Firewall and Router Ports

The first thing to check is to make sure your firewall and router has port 27015 open and forwarded (or whatever port you are using for your server). You have to have both UDP and TCP forwarded for the server to be listed and accessible.


Listenserver

If this is a listenserver, you need to make sure you have sv_LAN 0 set in console or in your launch properties or in your listenserver.cfg file. The typical error seen if that is set wrong is LAN Games Restricted to Class C Clients error.


Router NAT

If you are behind a router that is doing NAT translation, your Server will have a different internal IP address than what is needed to list in the Master List (players can't connect using your internal IP address).


Publish your Region

You can also add some additional region information to make it easier to find your server: sv_region #


sv_region codes

* 0 - US East coast
* 1 - US West coast
* 2 - South America
* 3 - Europe
* 4 - Asia
* 5 - Australia
* 6 - Middle East
* 7 - Africa
* 255 - world

If you set sv_region 255 then your server is only listed in world but if you set one of the other regions then your server gets listed twice, in the region you set and in the world. If you set an invalid region things will be unpredictable.


Other Things

Here are some additional reported symptoms that are often reported as Server listing problems but are client related (not Server related):

* No servers, or only a few, are listed (client problem, firewall, steam rate, router)
* Servers won't stay listed (client problem, serverbrowser.vdf file bad)
* Servers won't list in your History or Favorites (client problem, serverbrowser.vdf file bad)
* Your server listing is very slow (client problem, Steam rate set too low)
* Your Internet connection drops when you list a lot of servers (Client Problem, router problem)
* Frequently after playing for a while you're disconnected with garbled messages (Client problem, router problem)


Serverbrowser Problems

If you only have a problem with servers listing or staying listed or in history (but can play otherwise (client problem), you should be able to solve the problem by closing Steam, deleting masterservers.vdf and serverbrowser.vdf in the Config directory, and re-launching Steam.


Try a Different Skin

You also might be able to clear up the problem by changing your Steam skin to the default, or to gray if you're already using the default.


Your Router

Otherwise the source of the problem is probably your router. If you don't have a router, it could be because QoS or uPnP is enabled on your server, because you are on a wireless connection and XP "Wireless Zero" service is enabled, or because you have some other software installed that's interfering with Steam.


Norton/Symantic

If you have Norton Internet Security installed, try temporarily disabling this service (don't kill the task, use the normal Norton Services exit) to see if that clears the problem up.


ZoneAlarm and other Firewalls

Likewise ZoneAlarm Pro and most other firewall programs can cause problems if they're not properly configured. Windows XP users, please note: the XP SP1 firewall will not cause these problems, but the XP SP2 firewall might if it's not properly configured. You can search this Knowledge base for more help on configuring your hardware or software firewall.


Bypass Your Router

If you do have a router and it's separate from your modem (cable or DSL), try bypassing your router and plug your computer directly into the modem. If it's your router, the problem should then clear up.


SPI Problem

If you've identified it as a router-related problem, it could be because SPI-mode or uPnP is enabled on the router. The problem with SPI-mode has been reported for the D-Link DI-604, with firmware 1.81 (Euro).


Router Firmware

Other router issues are related to the firmware installed. Problems have been reported with routers and modems from Gigafast, Linksys, and Actiontec, and in some cases you'll need to downgrade your firmware to an older version in order to clear up the problem.

Please contact the tech support for the manufacturer of your router to get assistance.

[mxia205]

yes... done that and nothing..:

the ting is that my server is runing on patch v23 (non-steam) ,but before the new what ever comed up it worked...i turned on my server then serch it and whola....but now someone made something new (patch "new masterserver heartbit") and my server is just....nothing...i have 2 servers runing amx mod x one normal and on zombie mod.....

can i just type in console:
setmaster add <ip> <port>

if i can then if you can,send me ip and port

thnx for tut....it might com in handy