Counter-Strike.com

daveeeeee · 12-03-2008, 07:48 AM

I don't think you'll have heard this one before.

As I aim left and right my crosshair drifts upwards at the same time.

So if I see someone's head to the right, and I aim over to it, I end up shooting above his head because the crosshair creeps up as I move the mouse! >.<

It used to happen with my g5, also happens with my diamondback 3g, so I dont think its hardware related.

A friend mentioned negative acceleration?

I have tried it with and without mousefix, and enforcing no accel on the mouse drivers.

*edit* This does not happen in any other game

Kompot · 12-03-2008, 09:47 AM

Check your mouse pad, maybe there are some worn out surfaces, that might cause that.

Mr.Bob · 12-03-2008, 12:38 PM

Does the X-Hare move up or is it the verticle lines of the X-H that move up/down?

Heidymus · 12-03-2008, 12:39 PM

Also, you may want to try looking around this forum for solutions. I know I've responded to a few people with mouse problems and there are a BUNCH of solutions that people have typed to problems like this, etc.

Here, I'll get you started:

http://forums.counter-strike.com/sea...id=79814&pp=25

R.I.D.D.I.C.K · 12-08-2008, 07:06 PM

i had that problem but i mean i just got a new mouse i mean its prolly just the mouse how old is it

12-03-2008, 07:48 AM	#1 (permalink)
daveeeeee Member Hostage Join Date: Dec 2008 Posts: 2	mouse issue ! new one =) I don't think you'll have heard this one before. As I aim left and right my crosshair drifts upwards at the same time. So if I see someone's head to the right, and I aim over to it, I end up shooting above his head because the crosshair creeps up as I move the mouse! >.< It used to happen with my g5, also happens with my diamondback 3g, so I dont think its hardware related. A friend mentioned negative acceleration? I have tried it with and without mousefix, and enforcing no accel on the mouse drivers. edit This does not happen in any other game Last edited by daveeeeee; 12-03-2008 at 07:49 AM. Reason: adding content

12-03-2008, 09:47 AM	#2 (permalink)
Kompot Member Terrorist Join Date: Nov 2008 Posts: 78	Re: mouse issue ! new one =) Check your mouse pad, maybe there are some worn out surfaces, that might cause that.

12-03-2008, 12:38 PM	#3 (permalink)
Mr.Bob Member THE ARCHITECT! Join Date: Jun 2008 Location: USA Posts: 3,974	Re: mouse issue ! new one =) Does the X-Hare move up or is it the verticle lines of the X-H that move up/down?

12-03-2008, 12:39 PM	#4 (permalink)
Heidymus Moderator Da Bomb Defuser Join Date: Sep 2008 Location: Miami, FL Posts: 1,860	Re: mouse issue ! new one =) Also, you may want to try looking around this forum for solutions. I know I've responded to a few people with mouse problems and there are a BUNCH of solutions that people have typed to problems like this, etc. Here, I'll get you started: http://forums.counter-strike.com/sea...id=79814&pp=25 __________________ Website: www.xsagaming.com (we have an arcade with Tetris, Space Invaders, Asteroids and a few other games for bored people ) CSS 24/7 Scoutzknivez Server IP: sk.xsagaming.com CSS 24/7 Cal Rotation Server IP: cal.xsagaming.com Vent Server IP: voice500.counter-strike.com Port: 4497 *** * * Yes, I'm a bit of an insomniac * * ***

12-08-2008, 07:06 PM	#5 (permalink)
R.I.D.D.I.C.K Member Counter-Terrorist Join Date: Dec 2008 Posts: 164	Re: mouse issue ! new one =) i had that problem but i mean i just got a new mouse i mean its prolly just the mouse how old is it __________________ 1shot 1kill no hack just skill

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mouse issue	PSU2Legit2Quit	Counter Strike 1.6	2	11-22-2008 12:45 PM
help with an FPS issue in cs 1.6	bjebusj	Installation & Tweaking	4	10-04-2008 04:08 PM
a3d issue	SantaClaws	Counter Strike 1.6	0	07-30-2008 04:04 PM
fps issue.	snozberry	Counter Strike 1.6	4	08-02-2007 12:31 PM
not a big issue, but...	CaRnAgE!	Forum Related Technical Questions	1	03-17-2007 06:56 AM